Disclosure Document

The following document is presented by General Incorporated Association JASPAR as information for those other than members.
This document cannot be edited except as a template.

Handbook for Functional Safety [Software Partitioning Edition]

Release date 24 February,2014
This document explains, using a function safety template, software safety analysis and the design verification process, focusing on
dependent failure (cascade failure) and shared resources between software components, in order to guide software designers so that they can
implement software partitioning required under Part 6 and Part 9 of ISO26262, and also explains various types of safety policies (SIM/SPM) for
realizing partitioning, including relative comparisons thereof.

Handbook for Functional Safety [Microcontroller Application Edition]

Release date 24 February,2014
This document focuses particularly on evaluation of quantitative benchmarks for random software failures, and summarizes the thinking on
vehicularon-board microcomputers based on the results of studies by the JASPAR Functional Safety Microcomputer Working Group,
for development of ISO 26262 compliant vehicular on-board electronics systems.

Handbook for Functional Safety [ASIC Edition]

Release date 24 February,2014
This document describes ASIC's thinking regarding metric calculation required by ISO 26262. This document seeks to effectively utilize
the thinking in the explanatory document for functional safety (microcomputer volume) and expand it into ASIC.

Functional Safety Technical Template Entry Guide [System Development Technical Safety Concepts Edition]

Release date 24 February,2014
This document is intended to support designers in creating deliverables by describing objectives, work content, and cautions regarding the entry
columns of the functional safety template.

Functional Safety Technical Template Entry Guide [Hardware Development Edition]

Release date 24 February,2014
This document is intended to support designers in creating deliverables by describing objectives, work content, and cautions regarding the entry
columns of the functional safety template.

Functional Safety Technical Template Entry Guide [Software Development Edition]

Release date 24 February,2014
This document is intended to support designers in creating deliverables by describing objectives, work content, and cautions regarding the entry
columns of the functional safety template.

Functional Safety Support Template Entry Guide [Supporting Process and Verification Edition]

Release date 24 February,2014
Each volume of the "Functional Safety Template" shows that product development is carried out based on ISO 26262. By carrying out
product development along the lines of the template, it is possible to create and explain each work deliverable required by ISO 26262.

Overview of Functional Safety Templates

Release date 24 February,2014
This document is intended to explain the positioning and structure of the "Functional Safety Template" and "Entry Guide for Templates".

Functional Safety Technical Templates[System Development Technical Safety Concepts Edition]

Release date 24 February,2014
Each volume of the "Functional Safety Template" shows that product development is carried out based on ISO 26262. By carrying out
product development along the lines of the template, it is possible to create and explain each work deliverable required by ISO 26262.

Functional Safety Technical Templates[Hardware Development Edition ]

Release date 24 February,2014
Each volume of the "Functional Safety Template" shows that product development is carried out based on ISO 26262. By carrying out
product development along the lines of the template, it is possible to create and explain each work deliverable required by ISO 26262.

Functional Safety Technical Templates[Software Development Edition ]

Release date 24 February,2014
Each volume of the "Functional Safety Template" shows that product development is carried out based on ISO 26262. By carrying out
product development along the lines of the template, it is possible to create and explain each work deliverable required by ISO 26262.

Functional Safety Support Templates[Configuration Management Plan Edition]

Release date 24 February,2014
Each volume of the "Functional Safety Template" shows that product development is carried out based on ISO 26262. By carrying out
product development along the lines of the template, it is possible to create and explain each work deliverable required by ISO 26262.

Functional Safety Support Templates[Change Management Plan Edition]

Release date 24 February,2014
Each volume of the "Functional Safety Template" shows that product development is carried out based on ISO 26262. By carrying out
product development along the lines of the template, it is possible to create and explain each work deliverable required by ISO 26262.

Functional Safety Support Templates[Document Management Plan]

Release date 24 February,2014
Each volume of the "Functional Safety Template" shows that product development is carried out based on ISO 26262. By carrying out
product development along the lines of the template, it is possible to create and explain each work deliverable required by ISO 26262.

Functional Safety Support Templates[Verification Review Edition]

Release date 24 February,2014
Each volume of the "Functional Safety Template" shows that product development is carried out based on ISO 26262. By carrying out
product development along the lines of the template, it is possible to create and explain each work deliverable required by ISO 26262.

Functional Safety Support Templates[Confirmation Review Edition]

Release date 24 February,2014
Each volume of the "Functional Safety Template" shows that product development is carried out based on ISO 26262. By carrying out
product development along the lines of the template, it is possible to create and explain each work deliverable required by ISO 26262.

Functional Safety Support Templates[Test Edition]

Release date 24 February,2014
Each volume of the "Functional Safety Template" shows that product development is carried out based on ISO 26262. By carrying out
product development along the lines of the template, it is possible to create and explain each work deliverable required by ISO 26262.

Functional Safety Support Templates[Integration Test Edition]

Release date 24 February,2014
Each volume of the "Functional Safety Template" shows that product development is carried out based on ISO 26262. By carrying out
product development along the lines of the template, it is possible to create and explain each work deliverable required by ISO 26262.